Free way to get better flowing injectors
|notice injector on the right has a cap
Cap off flow rate is 740cc (fine disk pattern)
Cap on "stock" flow rate is 440cc
[You must be registered and logged in to see this link.]
Removal of the cap is simple.
Using a rotary tool grind away the tiny fine weld flush to the injector
(should fall off after enough is removed)
Using fine sandpaper get rid of any burrs and roughness left
clean injectors before reinstalling them!!!!!!!
I recommend changing the o-rings since you already have them out
After that retune.
|notice injector on the right has a cap
Cap off flow rate is 740cc (fine disk pattern)
Cap on "stock" flow rate is 440cc
[You must be registered and logged in to see this link.]
Removal of the cap is simple.
Using a rotary tool grind away the tiny fine weld flush to the injector
(should fall off after enough is removed)
Using fine sandpaper get rid of any burrs and roughness left
clean injectors before reinstalling them!!!!!!!
I recommend changing the o-rings since you already have them out
After that retune.